Seat Concepts KTM (2016) SX/XCF (2017-19) XCW/EXC-F (2017-18) SX/SXF/XCF/XC *TALL Comfort*

Width: 7″

Height: 9/16″ (15mm) TALLER than the stock seat

Details:
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

COMPLETES WILL NOW FIT THE TPI BIKES!

——————————————————————
PLEASE VERIFY FITMENT USING THE LIST BELOW OR USING “MY GARAGE” AND SELECTING YOUR VEHICLE BEFORE PURCHASING THIS SEAT.  PLEASE CALL US IF YOU HAVE ANY QUESTIONS PRIOR TO MAKING YOUR PURCHASE
——————————————————————

Fits Years/Models:

2015 450SX Factory Edition
2016 SX 125
2016 SXF 250, SXF 350, SXF 450
2016 XCF 250, XCF 350, XCF 450
2017 SX 125, SX 150, SX 250
2017 SXF 250, SXF 350, SXF 450
2017 XC 300
2017 XC-W 150, XC-W 250, XC-W 300
2017 EXC-F 250, EXC-F 350, EXC-F 500
2017 XC-F 250 XC-F 350, XC-F 450
2018 SX 125, SX 250
2018 SXF 250, SXF 350
2018 XC 300
2018 XC-W 150, XC-W 250, XC-W 300
2018 EXC-F 250, EXC-F 350, EXC-F 500
2018 XC-W TPI 250
2019 EXC-F 350, EXC-F 450, EXC-F 500
2019 XC-W TPI 250, XC-W TPI 300
2019 XC-W 150

***WILL NOT FIT: 2018 450SX-F Factory Edition***

Important Information:
Per OEM specifications, the seat bolts should be tightened NO MORE than 7 ft/lbs to prevent tightening or stripping.  Over tightening can cause a failure.  Cross threading can also be an issue and should be avoided.  DO NOT use air tools to tighten seat bolts as it can cause them to be stripped.